INON clear photo system for S90/WP-DC35/AD28 mount

[dogdrjohn]

Anybody using the S90/WP-DC35/AD28 mount system with an INON D2000? I am re-using the fiberoptic synch chord and its little mount from a previous AD mount, so I do not have the S90 specific Clear Photo System to block visible light. How does INON mount the dark film to block visible light from the popup flash? On my old SOny system it mount directly over the flash lens on the camera but I would be really concerned about gumming up the popup mechanism if the film was placed directly over the flash lens on the S90. I thought of just placing some exposed xray film in the upper corner of the housing to block MOST of the camera's internal flash. Any suggestions?
Thanks

 

[Nemrod]

I would mount some unexposed, developed slide film into the housing and leave the pop up alone. N

 

[flareside]

I know this is an old thread but for what its worth, I just took the Clear Photo System sticker from an old sd800/WP-DC9 setup, reversed it and stuck it on the inside of the WP-DC35 housing directly in front of the flash. I test fired it in a dark room and it worked like a charm.

It takes a little finessing to get the sticker in place but once its there, it never needs to be removed. I also transferred the plastic blackout panel from the old mount kit as the holes aligned perfectly.