Inflator adaptation problem

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I

invader28

Guest
Messages
9
Reaction score
0
Location
NorCal
# of dives
I just don't log dives
I have a new bladder that has the "generic" inflator fitting and just picked up a Air2 assembly that has the Scubapro nut and of course it doesn't fit the "generic" fitting. My question is has anyone adapted the Scubapro to the generic? Can the Scubapro fitting (bladder side) be bought? I was thinking of possibly replacing the nut, can the nut be removed easily? All suggestions are welcomed! Picture attached.

air2 (Large).JPG
 
I wanted to keep the shoulder dump. I could also buy the "generic" dump valve and replace the Scubapro one.
 
Deleted
 
Last edited:
Does anyone have a fitting (BC side, inflator) from a damaged Scubapro BC you want to get rid of? I still want to model up the fitting and make a adapter.
Thanks

This is the generic fitting, looking for the Scubapro.

inflator_fitting (Large).JPG
 
Last edited:
Those Scubapro and Mares fittings are different for a reason: they deliver more air than the standard fitting can handle. Think about it--if you are on your safe second in a real situation, you're probably going to be stressed and sucking wind like there's no tomorrow. The standard inflator simply cannot handle the air volume. That's why safe seconds have different fittings.

If you insist on getting an adapter, Innovative sells one. Contact your LDS for details.
 
Thanks TF, but I'm looking for SP fitting that the inflator hose asy. screws onto. I think your talking about the LP quick disconnect fitting?
 
You must log in or register to reply here.
https://www.shearwater.com/products/peregrine/

Back
Top Bottom