flowerpecker
Contributor
I’ve got an Ikelite system for a D100 up for sale – pretty much everything you need to take your Nikon D100 underwater and do everything from macro to wide angle shots, except for the camera and lenses. It’s a pretty nice and not-too-expensive rig but I’ve reached a point where I simply want something small and light, even if I have to sacrifice some flexibility and quality in my shots, and so have been using mostly my point-and-shoot rig. Everything is in good to very good condition and has been well cared for, though some parts are older than others and there are a couple of disclaimers as noted.
What’s in the box, so to speak:
Everything is in good to very good condition, has been well cared for – rinsed, dried, cleaned as appropriate – for its entire life. Asking $1600 for the lot plus actual shipping. Will consider piece-meal sales if there’s no interest in the lot.
What’s in the box, so to speak:
- Ikelite #6610 Clear Housing for D100: for a Nikon D100 camera. Typical Ikelite housing offering full control of the camera, so you can shoot in manual mode without problem. Purchased used in 2007. Not sure how many dives on it now but probably a hundred plus. Serviced in 2007 or 2008.
- Dome Port #5503.55: For 28mm and wider lenses less than 4.5" (11.4cm). With shade and neoprene cover.
- Flat Port #5502.41: For standard, macro or zoom lenses less than 4.1" (10.4cm). With neoprene cover.
- Tray with dual #9571.3 QR Handles: Aluminum tray base with two quick release handles
- SA100 Strobe Arms: (2) QR ball extensions for the tray handles, (2) 6” arms and (1) 9”
- Digital Substrobe DS125 x 2: One purchased in 2007, the other in 2008. Disclaimer 1: The older strobe has a loose reflector – no idea what caused it, I just noticed it rattling one day - which can change the shape of the beam depending on the orientation of the strobe. I use this strobe as the slave and haven’t noticed that the changes in beam shape causes any problem when I take photos (but perhaps I’m not a good enough photographer to notice?) and it definitely doesn’t affect the overall functionality of the strobe. Disclaimer 2: One diffuser has also been lost.
- Smart Charger #4066.1 x 2: One for each Substrobe, each with four interchangeable plug adaptors for US, Europe, etc. Were purchased at the same time as the strobes.
- Digital Slave Sensor #4100.5: for the second strobe
- Syncord #4103.51 x 2: for digital TTL housing to DS Substrobe
- Delrin protective cap #0301 for synccord:
- Zoom clamp & sleeve #9059.9: For zoom control on some lenses
- Zoom clamp & sleeve #9059.8: For zoom control on some lenses
- O-ring set #5512.68: Includes main and port o-rings
- Housing Control Accessory Package: Assorted replacement push button housing controls
- Pelican 1510 wheeled hard case: This will hold most but not all of the equipment listed,
Everything is in good to very good condition, has been well cared for – rinsed, dried, cleaned as appropriate – for its entire life. Asking $1600 for the lot plus actual shipping. Will consider piece-meal sales if there’s no interest in the lot.