HP130s, HP100s, LP85s, AL80s, AL40s, Argon Setup

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Status
Not open for further replies.

Rainer

Contributor
Messages
6,031
Reaction score
590
Location
San Francisco, CA
I would prefer to sell these to people local to me in SoCal. Cylinders are in San Pedro (Los Angeles), CA. Wife works in Long Beach if that helps anyone, and we do make occasional trips down to San Diego. If they don’t sell locally, I will consider shipping at buyer’s expense (in which case cylinders would have to be drained). Send me a PM if you're interested or have any questions.

Double HP130s
Halcyon DIN Manifold, 3" Highland Bands, PST, O2-Clean
Last Hydro: 1/09
Currently full (3600 PSI) of rich 21/35 (20/39)

Cost: $850 (contains around $200 in trimix)

HP130s.jpg

————————

Double HP100s
Halcyon DIN Manifold, 2.5" Highland Bands, Worthington, O2-Clean
Last Hydro: 1/14
Currently full (3000 PSI) of 32%

Cost: $700

HP100s.jpg

————————

Double LP85s
Sea Elite DIN Manifold, 2.5" Highland Bands, Worthington, "+” Rating
Last Hydro: 8/11
Currently full (2600 PSI) of 32%

Cost: $650

LP85s.jpg

————————

HP130 (x2)
Thermo DIN, PST
Last Hydro: 1/10
Currently full (3500 PSI) of Air

Cost: $325 each or $600 for both

HP130x2.jpg

————————

AL80 (#1)
Thermo DIN, Stage Rigging, Luxfer, O2-Clean
Last Hydro: 8/11
Currently full (2900 PSI) of 50%

Cost: $140

AL80 (#2)
Thermo DIN, Stage Rigging, Luxfer, O2-Clean
Last Hydro: 8/11
Currently 1000 PSI of 50%

Cost: $130

AL80x2.jpg

————————

AL40 (#1)
Thermo DIN, Stage Rigging, Luxfer, O2-Clean
Last Hydro: 7/07
Currently empty

Cost: $100

AL40 (#2)
Thermo DIN, Stage Rigging, HyMark, O2-Clean
Last Hydro: 4/08
Currently full (3000 PSI) of O2

Cost: $110

AL40x2.jpg

————————

Argon Setup (AL6 + Argon Regulator + OPV + LP Hose)
Thermo DIN, Luxfer
Last Hydro: 3/07
Currently full (2800 PSI) of Argon

Cost: $150

Argon Setup.jpg
 
Last edited:
I typically get 2-3 dives off an AL6. Really depends on the dive profile. Square dives use a lot less inflation gas than multi-level dives (where you're constantly dumping and adding gas). For open-ocean diving, I really like the AL6.

---------- Post added March 14th, 2015 at 12:13 PM ----------

HP100s sold.
AL80 (#1) sold.
AL40 (#2) sold.
Argon setup sold pending payment.
 
All that remains are the two single HP130s. These aren't much heavier than a HP100, but hold 30% more gas. Great for deeper or multilevel dives. You can easily get two shallow dives off one fill.

HP130x2.jpg
 
Status
Not open for further replies.
https://www.shearwater.com/products/teric/

Back
Top Bottom