I know there was a thread before this on how to set up your doubles, with a link that i checked out, but i didnt bookmark it. Can anyone post the link or point me in the right direction.
How to set up doubles
- Thread starter Jorbar1551
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
This thread http://www.scubaboard.com/showthread.php?t=114689
has some good pictures if you're rigging up for singles. If you're going for doubles, then put the primary and inflator on the right post and the spg, drysuit and secondary on the left post.
Route everything down. There shouldn't be anything that sticks up above the level of the 1st stages.
I'm sure someone will be along shortly to post a link to that other thing you were talking about......
R..
has some good pictures if you're rigging up for singles. If you're going for doubles, then put the primary and inflator on the right post and the spg, drysuit and secondary on the left post.
Route everything down. There shouldn't be anything that sticks up above the level of the 1st stages.
I'm sure someone will be along shortly to post a link to that other thing you were talking about......
R..
H2Andy
Contributor
DiveRite Express has a good guide. this is what i used:
http://www.diveriteexpress.com/library/doubles.shtml
(that's for actually setting up the doubles and manifold)
http://www.diveriteexpress.com/library/doubles.shtml
(that's for actually setting up the doubles and manifold)
OP
thanks, exactly what i ws looking for.
double80s
Contributor
Here's another reference http://www.cisatlantic.com/trimix/doubles/doubles.htm
Similar threads
