Hose to connect from reg to BCD..

[msfreddo]

I've hooked up my regulator and octo together, added in my dive computer, but I need to order a hose to hook to my bcd...Does anyone know if it's a high pressure or low pressure hose?

Any suggestions on where to get one? Is there particular length or diameter that I need?

thanks in advance for the info!

Mike

 

[Hank49]

I've hooked up my regulator and octo together, added in my dive computer, but I need to order a hose to hook to my bcd...Does anyone know if it's a high pressure or low pressure hose?

Any suggestions on where to get one? Is there particular length or diameter that I need?

thanks in advance for the info

Mike

It's a low pressure hose. And lucky for you, you can't make the mistake of hooking it to the high pressure ports because it's a different size hole. Most BCDs come with the hose. Since apparently yours didn't, you should be able to get one at any dive shop. they're universal pretty much but it wouldn't be a bad idea to take your rig with you just to have the guy check it out and see if you did everything right.

 

[Couv]

It's a low pressure hose. And lucky for you, you can't make the mistake of hooking it to the high pressure ports because it's a different size hole. Most BCDs come with the hose. Since apparently yours didn't, you should be able to get one at any dive shop. they're universal pretty much but it wouldn't be a bad idea to take your rig with you just to have the guy check it out and see if you did everything right.

Ditto on the bring it with you, Scubapro uses a different quick disconnect than most BC/inflator fittings. Also, if you have a really old USD BC, the fitting is very different.