reefrat
Contributor
I want to convert my spare D1X first stage from yoke to DIN. Anyone know which conversion kits will fit this and where to find relevant process/torque settings etc?
HOG D1X yoke to DIN?
- Thread starter reefrat
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
OMyMyOHellYes
Contributor
Darn fine question. Wondering the same thing.
OMMOHY
OMMOHY
Contact Jim Lapenta via this board. He should be able to advise on HOG regulators...or give the folks at Divers Supply in Atlanta/Marietta Georgia a call and ask, as they are the HQ for HOG equipment.
-Z
-Z
HOG 0315 DIN handwheel
HOG 1C-01-002-14 HOG D1 DIN Housing
HOG-1C-01-002-15-PT DIN Retainer Cap
HOG-1F-01-001-03 D1 Sintered Filter
And new O-rings for Housing and Retainer Cap. (these are in a D1 service kit)
Your reg tech instructor can provide you with the correct torque settings.
HOG 1C-01-002-14 HOG D1 DIN Housing
HOG-1C-01-002-15-PT DIN Retainer Cap
HOG-1F-01-001-03 D1 Sintered Filter
And new O-rings for Housing and Retainer Cap. (these are in a D1 service kit)
Your reg tech instructor can provide you with the correct torque settings.
OMyMyOHellYes
Contributor
Thnx - OMMOHY
Similar threads
