retire2disney
Guest
The hard part of using mcmaster is what they are going to call what you are looking for and how they list it in their catalog
handle for dive light ?
- Thread starter doghouse
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
OP
doghouse
Contributor
Curses Foiled again!
Well the putty did work wonders, the problem is that I tried to get the wires to set in the putty and not use a sealent on them... Well the putty shrank when it dried. I did not notice this until. I powered up the light and put it in a pressure pot. When I opened it up, the light was out.
Water had leaked in and hit the ceramic bulb holder, and snapped in 2.
Oh Well Back to the drawing board. Thanks for the reminder about McMaster, I had forgotten all about them.
Well the putty did work wonders, the problem is that I tried to get the wires to set in the putty and not use a sealent on them... Well the putty shrank when it dried. I did not notice this until. I powered up the light and put it in a pressure pot. When I opened it up, the light was out.
Water had leaked in and hit the ceramic bulb holder, and snapped in 2. Oh Well Back to the drawing board. Thanks for the reminder about McMaster, I had forgotten all about them.
Similar threads
