Full Tank Analyzer

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

JediCheese

Registered
Messages
63
Reaction score
70
Location
Las Vegas
# of dives
50 - 99
I am researching the various DIY Nitrox/Trimix analyzers on here and realized that I have a few old 1st stages sitting around. Has anyone combined a 1st stage with a digital pressure gauge and an analyzer all in one? It would be bulkier than only an analyzer but would also allow a log of the whole tank (PSI, CO, Helium, and O2).

Less helpful on a boat but nice at a shop when picking up tanks to verify that you're getting what you want.
 
I use an old reg attached to an SPG and a BC inflator hose. I plug my analyzer pressure reducer into the BC hose. Just add a longer analyzer / inflator hose, and the analyzer can stay on the bench or in the rack.
 
same here - I've used an older regulator with a full size SPG & inflator hose, and also used an Argon bottle regulator that just had a button gauge on it. I also keep a short wooden dowel in my analyzer kit to release the pressure from the regulator (so I don't damage the Schrader valve by jamming a knife or other metal object in there ;) )
 

Back
Top Bottom