FS: Dive Rite Rite Source

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

edasque

Contributor
Messages
136
Reaction score
0
# of dives
100 - 199
Selling Dive Rite Rite Source backup regulator/Octo. Brand new, never used. Comes with the LP Hose, 28-Inch for Rite Source. Dive Rite Express price: $228 (Rite Source + LP Hose with adapter). Will sell for $150 + shipping.

Erik

RG2200_3-250.jpg

"
The ultimate tool for streamlining, the Rite Source is attached to the inflator hose on any BC and is fed by the first stage in the same manner as any regulator. The Rite Source can be assembled on nearly any BC and eliminates the need for a separate back up regulator aka 'octopus'. It is supplied with a hi-flow quick coupling hose that replaces your standard low pressure BC inflator hose-- thus eliminating the hose and dangling octopus regulator that is a hassle.
When needed, the Rite Source allows the diver to breathe normally as from any second stage. While breathing, the diver can simultaneously and rapidly inflate the BC as well as deflate, or orally inflate, as you would on any standard inflator mechanism. This system is also perfect for use as an on board bailout system on the O2ptima Closed Circuit Rebreather.
The Rite Source is a complete solution that works with nearly all BC's. The assembly includes a 28-inch low pressure hose with the special hi-flow quick disconnect fitting, a 16-inch corrugated hose, and a pull-to-dump rapid exhaust elbow. To attach to Dive Rite air cells, just remove the existing inflation assembly from the air cell and replace with the Rite Source. For other BC's, remove the Rite Source from corrugated hose assembly, remove the existing power inflator on the BC, and attach the Rite Source in it's place"
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom