FS: - Canon 350D + Ikelite housing

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Status
Not open for further replies.

Hammerhead

Contributor
Messages
4,318
Reaction score
40
Location
Teetering
# of dives
OK, so I'm planning on upgrading. Not quite sure why given that I'm still pretty crap, but that's the plan.

In order to fund this, I'm selling off the following: -

Canon Digital Rebel XT 350D with kit lens: -

http://www.adorama.com/ICADRXTBK.html

Basically it's a year old, good condition (some cosmetic scuffs, still 100% functional) and comes with battery / charger / 1 GB card / software / manuals etc in original box.

Ikelite housing and tray with grips for this camera, bought at the same time: -

http://www.berger-bros.com/Merchant...Category_Code=IKE HOUSINGS-U&Store_Code=BBCVD

With manual and in original box if you like, it's 95% new and I was using it last week.

As I'm sticking with Ikelite for the next set-up, I will not be selling the arms / strobes.

The camera cost me $650 and the housing $1,200, so $1,850 is what it cost me.

My asking price is $1,300 all in (for simplicity's sake I'd prefer not to split the package unless I have to).

Shipping may be an issue as I am based in Hong Kong, but talk to me if you're interested and we'll see what we can do.

Note Before anyone brings it up, this housing (not the camera) has had a partial flood.

That said, it was flushed immediately with distilled water, cleaned, dried and works perfectly. The circuitry for the strobes was completely undamaged.

The flood was not a defect, but happened when one of the port clips was left undone (my own stupid fault).

For all intents and purposes, it's as though the flood never happened, I mention it only to be scrupulously honest.
 
It flooded because one of the port clips was not closed, but it really doesn't matter as I've managed to modify it to fit my 400D and won't be selling after all.
 
Status
Not open for further replies.
https://www.shearwater.com/products/swift/

Back
Top Bottom