Set 1: Two Scubapro marked galvanized Faber LP 95s with Dive Rite modular DIN/K valves.
Manufactured in July 1988 and January 1987.
Last hydro test 3-12, new VIP. Equipped with Dive Rite modular valves.
Bands and isolator valves potentially available for an extra $50.
Tanks are located in High Springs FL in a storage locker at Cave Country Dive Shop.
Set 2: Two galvanized LP 95s with Thermo modular DIN/K valves
Two Galvanized LP95s, manufactured 03-2002, last hydro test 12-14.
Thermo modular 200 bar DIN/K valves.
Bands and isolators available for an extra $50.
Tanks located in our storage locker at Cave Country Dive Shop in High Springs FL.
$400 for the pair.
Set 3: Two Faber LP 95s with Dive Rite 200 Bar Modular DIN/K valves.
A pair of Faber LP 95s, manufactured 11-04 and requalified (hydro tested and VIPd) 11-15.
Equipped with 200 bar Dive Rite modular valves.
We've used them for side mount, but we have the bands and isolator valves available to use them as back mounted doubles for an extra $50.
I've wire brushed the few small spots with missing paint (hydro test dates, and a quarter sized spot below the shoulder) to remove any rust and painted those areas with ZRC cold galvanizing compound.
Tanks are located in Winterville NC. We can transport them to the High Springs FL area January 15-17, or in April.
Set 4: Two galvanized LP 95s (white paint over the galvanizing)
Two galvanized LP95s made 1-94, and last hydro tested 11-15.
Equipped with Dive Rite modular valves.
Bands and isolator valve available for an extra $50.
Tanks are located in Winterville NC. We can transport them to the High Springs FL area January 15-17, or in April.
Manufactured in July 1988 and January 1987.
Last hydro test 3-12, new VIP. Equipped with Dive Rite modular valves.
Bands and isolator valves potentially available for an extra $50.
Tanks are located in High Springs FL in a storage locker at Cave Country Dive Shop.
Set 2: Two galvanized LP 95s with Thermo modular DIN/K valves
Two Galvanized LP95s, manufactured 03-2002, last hydro test 12-14.
Thermo modular 200 bar DIN/K valves.
Bands and isolators available for an extra $50.
Tanks located in our storage locker at Cave Country Dive Shop in High Springs FL.
$400 for the pair.
Set 3: Two Faber LP 95s with Dive Rite 200 Bar Modular DIN/K valves.
A pair of Faber LP 95s, manufactured 11-04 and requalified (hydro tested and VIPd) 11-15.
Equipped with 200 bar Dive Rite modular valves.
We've used them for side mount, but we have the bands and isolator valves available to use them as back mounted doubles for an extra $50.
I've wire brushed the few small spots with missing paint (hydro test dates, and a quarter sized spot below the shoulder) to remove any rust and painted those areas with ZRC cold galvanizing compound.
Tanks are located in Winterville NC. We can transport them to the High Springs FL area January 15-17, or in April.
Set 4: Two galvanized LP 95s (white paint over the galvanizing)
Two galvanized LP95s made 1-94, and last hydro tested 11-15.
Equipped with Dive Rite modular valves.
Bands and isolator valve available for an extra $50.
Tanks are located in Winterville NC. We can transport them to the High Springs FL area January 15-17, or in April.
