First stage chart

[darkstar]

Please make the change the the sherwoods are in fact balanced.

Hey dude, are you stalking me?

The Blizzard first stage is balanced (which is what I entered)
MY Brut (which is old) is unbalanced. I have heard that you can buy a kit to adapt it as a balanced first stage, but I've not seen one.

This seems to agree with the Rodales chart which has all the Sherwood first stages except the Brut as balanced.

 

[rescuediver009]

Hey dude, are you stalking me?

The Blizzard first stage is balanced (which is what I entered)
MY Brut (which is old) is unbalanced. I have heard that you can buy a kit to adapt it as a balanced first stage, but I've not seen one.

This seems to agree with the Rodales chart which has all the Sherwood first stages except the Brut as balanced.

My bad, misread.....
There is not a kit to buy, it is just a part called the moving orifice. You can oder one from any sherwood deal for a couple bucks.

 

[Scubaroo]

Cut and paste doesn't work well with the layout we use, but here are the specifics on all the Zeagle regs:

http://www.zeagle.com/index.php?src=gendocs&link=regcomparison&category=Regulators

Thanks,

Scott

Great list Scott - do any of those feature 1/2" ports?

 

[WarmWaterDiver]

DA,

My Scubapro MK18 has two HP ports each 7/16" UNF - but is the most recent production variation (different end cap area). Was this a design change from the previous MK18?

 

[rescuediver009]

Great list Scott - do any of those feature 1/2" ports?

I am pretty sure that none fo them do...

 

[DA Aquamaster]

DA,

My Scubapro MK18 has two HP ports each 7/16" UNF - but is the most recent production variation (different end cap area). Was this a design change from the previous MK18?

Sorry - it's a typo. I copied a bit too much from the Mk16 entry.

I have corrected the original post. SP did have some port changes on the Mk 3 and Mk 5 and I added those as well.

 

[scubahorse]

Manufacturer: AquaLung
Model: Legend LX
Diaphragm/Piston: Diaphragm
Balanced/Unbalanced: Balanced ("over balanced")
Swivel Turret: no
Number of 3/8" LPs: 4
Number of 1/2" LPs: 0
Number of HPs: 2
Yoke: yes
DIN: yes
Environ seal: Yes

One of major difference between Ledend LX and Apeks ATX200 is Apeks has a 1/2" LP port.

 

[FrediSub]

Perhaps DA Aquamaster may wants to add this to his list:

Manufacturer: Scubapro
Model: Mk 17
Diaphragm/Piston: Diaphragm
Balanced/Unbalanced: Balanced
Swivel Turret: no
Number 3/8" LP ports: 4
Number 1/2" LP ports: 0
Number 7/16" HP ports: 2
Available in Yoke: Yes
Available in DIN: Yes
Enviro sealed: Yes

 

[cerich]

Requires Mares hose for 1/2" port due to DFC, other 1/2" hoses will not work.

The V32 Proton XL and Ice are the same.

As far as I know Mares is the only one still using 1/2" hose at all, the rest stopped years ago, but hoses are easy to come by.

 

[cerich]

It's not a kit per say but the balancing oriface and washers from the Magnum.

Balanced, in it's unique way...high performance....No....OK for recreational diving yes.