fiber optic
- Thread starter laazur
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
mike_s
Contributor
I doubt for a strobe that the cutting tool is that important. If it's "real glass" you are using (not plastic), then all you should have to do is "score" the side of the glass and it should break straight across.
making a strobe I doubt will disperse the light enough unless you have a reflective backing to disperse the light.
for a piece big enough to use as a strobe, try the underwater pool supply companies that use fiber optic to hook to a light that they run the fiber underwater to the portal for the light.
making a strobe I doubt will disperse the light enough unless you have a reflective backing to disperse the light.
for a piece big enough to use as a strobe, try the underwater pool supply companies that use fiber optic to hook to a light that they run the fiber underwater to the portal for the light.
Similar threads
