Looking for some feedback on tank positioning. I've been told that fronts of my tanks hang too low. I fiddled with all the adjustments a bit, not sure that made any difference. The bungees are already stretched a lot, and are pretty hard to pull over the valves, not sure if shortening them further is an option. Also, both SPGs are pressing against my chest (setup as in this video). What can I improve here? Sorry for the low quality of the photos, visibility was not great. ( Disregard the left inflator hose, which obviously sticks out, I tried to go from a 9-inch to a 14-inch one because my regs keep getting rotated under pressure, that was not helpful. ) Any suggestions would be welcome.
Right side:
Left side:
Right side looks a bit different from left, that's because the tank is basically riding on the light canister that I pushed as far to the side and back on the waist belt as I could per rjacks@'s suggestion in another thread, and the front of the tank is now essentially resting on it. There is nothing to support the left cylinder. If I can't make bungees tighter, I wonder if I should consider attaching them differently.
Right side:
Left side:
Right side looks a bit different from left, that's because the tank is basically riding on the light canister that I pushed as far to the side and back on the waist belt as I could per rjacks@'s suggestion in another thread, and the front of the tank is now essentially resting on it. There is nothing to support the left cylinder. If I can't make bungees tighter, I wonder if I should consider attaching them differently.
Last edited: