Face Seal On Hoods
- Thread starter PAdiver93
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
I want to have a amall overlap onto my mask skirt, between 1/4-3/8". If there is too much especially on top in pushes the mask around.
* I don the hood
* I put my mask on OVER the hood seal
* I use a silver Sharpie marker to draw lines from the skirt onto the hood. this creates a set of points that represent the edge of the skirt.
* doff it all
* make dots on the hodd seal 1/4-3/8" inward of the mask edge marks to create the overlap
* connect the dots to form a symetrical cut line
* Cut along the line with good shears. Remember to hold it all steady, it is a 3 dimensional material.
* Clean up the markings with rubbing alchohol.
Pete
* I don the hood
* I put my mask on OVER the hood seal
* I use a silver Sharpie marker to draw lines from the skirt onto the hood. this creates a set of points that represent the edge of the skirt.
* doff it all
* make dots on the hodd seal 1/4-3/8" inward of the mask edge marks to create the overlap
* connect the dots to form a symetrical cut line
* Cut along the line with good shears. Remember to hold it all steady, it is a 3 dimensional material.
* Clean up the markings with rubbing alchohol.
Pete
Similar threads
