scc135
Contributor
Is there any way to mount an bladder from an escape bcd on a backplate?
Escape Bladder on a backplate?
- Thread starter scc135
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
ScottZeagle
Contributor
- Messages
- 2,353
- Reaction score
- 72
If you have a ZEAGLE backplate, YES....it's quite easy.
If you have another brand of backplate, no....
Unless you want to try drilling holes, etc.
Thanks,
Scott
If you have another brand of backplate, no....
Unless you want to try drilling holes, etc.
Thanks,
Scott
OP
scc135
Contributor
How does one go about putting it on a zeagle backplate?
ScottZeagle
Contributor
- Messages
- 2,353
- Reaction score
- 72
The backplate comes with a set of screws and nyloc nuts.
The bladder lines up with pre-drilled holes on the BP, then you just attach the screws and nuts...and done!!
The bladder lines up with pre-drilled holes on the BP, then you just attach the screws and nuts...and done!!
OP
scc135
Contributor
Hi Scott, so if I were to use the express tech plate instead, I would use the cam bands to attach the bladder to the plate correct?
ScottZeagle
Contributor
- Messages
- 2,353
- Reaction score
- 72
That is correct!
Similar threads
