PfcAJ
Contributor
+1 on grommets. I think some marine supply stores might have stainless ones if you want to get fancy.
Drysuit d rings
- Thread starter aftershock109
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Peter_C
Contributor
You can use a nail etc. heated to quickly punch through pocket material, then install a brass grommet from the hardware store. They sell kits that often include a punch, and the anvils to form the grommet. Brass is fine, but they need to be brass, not brass colored. If in doubt use a magnet. Harbor Freights are steel. Home Depot, Lowes, etc. list their as brass and is what I use.
FWIW I cut the d-rings out of my pockets, and installed bungee.
FWIW I cut the d-rings out of my pockets, and installed bungee.
OP
aftershock109
Registered
Thanks for the replies
fisheater
Contributor
Let us know which method you use and how it turned out. Photos a plus!
Sent from my iPad using Tapatalk HD
Sent from my iPad using Tapatalk HD
Similar threads
