Double tank double reg manifold for 71.2"s?

[Ken Gregory]

Hi, Folks -

I'm new to the forum but old at diving - certified in 1965, cave diving since the mid '70's, dived all over this hemisphere. I've got several 71.2 steel tanks and a couple of manifolds, but I don't have a manifold that accommodates 2 regulators.

Any ideas where I could find a manifold for twin 71.2's that has 2 yoke mount reg mounts?

Thanks,

Ken

 

[runsongas]

piranha sells bands that you can use with the adjustable spacing modern manifolds like from DGX.

6.7 to 7.00 Inch Stainless Steel Cylinder Bands w/ Protective Rubber Padding , Piranha Dive Shop |

DGX Premium Dual-Outlet Long Neck Manifold w/Isolator

 

[2airishuman]

That's the setup I have on my 72cf twinset, except that my bands came used from fleabay and don't have the rubber pads.

 

[Ken Gregory]

Thanks, Gents! I'll check into it.

 

[Ken Gregory]

I checked with DGX and they said the manifold won't work with my old 71.2's.

 

[guruboy]

The bands link work with 7 5/8” center to center manifolds

The DGX is 8.5” C-C

 

[runsongas]

I checked with DGX and they said the manifold won't work with my old 71.2's.

Do you have the 1/2 NPT or 1/2 NPS necks on your tanks and not the standard 3/4 NPS?

 

[runsongas]

The bands link work with 7 5/8” center to center manifolds

The DGX is 8.5” C-C

good catch, the TDL ones might be an alternative.

https://www.techdivinglimited.com/7-00-Inch-Stainless-Steel-Doubles-Bands-p/tb-tdl-700.htm

 

[Compressor]

Welcome to SB.

 

[Ghetto Diver]

I have a set from here

A&D Adventures Other Vintage Scuba Stuff

For the manifold, older Selpac for double yoke... not what you are prolly looking for though.
I have both and am willing to part with if interested.