Dive Log Software (by Producer)

[Rygar]

Updated or Changed on 08.07.2022:

[Cressi-sub UCI (Underwater Computer Interface) v1.1.1]

[Dive-Xtras Castle Link v3.85.00]

[Divesoft Divesoft.center v0.4.29]

[DiveSystem Ratio Toolbox v1.8.5]

[Mares Dive Organizer v2.28.12.11113]

[Poseidon Rb Configuration tool for M28 and SE7EN v1.44]
[Poseidon Reef v1.2.14]

[Shearwater Cloud v2.9.2]

[Suunto Dive Manager v5 (1.5.4)]
[SuuntoLink v4.1.6]

[Tecdiving Divecomputer.eu Software Upgrader v2016.11.20.01.BT]

[UTC (Underwater Technologies Center) DiveSim v1.67 for UDI-14]

 

[Rygar]

Updated or Changed on 27.12.2022:

[Aqua Lung Diverlog v1.5.1]

[ATMOS PC Tool v20210514]

[Cressi-sub PC Interface v2.0.2.42]

[Dive-Xtras Castle Link v3.85.01]

[Divesoft Divesoft.center v1.1.1]
[Divesoft Firmware Manager v1.38.0.0]

[DiveSystem Ratio Toolbox v1.8.7]

[Garmin Express v7.15.2.0 for Descent Mk1]
[Garmin IQ Dive Computer v5.11.2]

[Merope Engineering K22 DPV Compass v1.8]

[Scubapro LogTRAK v1.8.7.0]

[Seacraft ENC2 v1.1.41.0]

[Shearwater Cloud v2.9.6]

[SuuntoLink v4.1.8]

 

[marc78]

You seem to be quite knowledgable about these programms.

In my search for a new DC I tried to get my current smartrak completed with new dives. updated win10 and I can import again.
Now if I want to move these to logtrak I miss a lot of them(100). I started diving without a DC in 1994 -
these dives import in logtrak 1999 So I think thats where it goes wrong, had about 100 dives without a DC and created these manually at some time in my digital log.
I bought a palmtopthingy around that year so I could read out the grey aladin I had at the time.
from there I could move them into a divelog that I forgot what it was - could be uwatec (trak?) as well.
I bought a Terra and moved to smartrack. Imported all my old dives and now I have 603 "recorded" dives.
I miss out on a considerable amount that I did not import - wrote down etc etc.

If I move to a new DC I want to import these 603 without consessions because I allready miss a lot.
How do I export these and which programm would you recommend as an alternative that can work with any new DC.

 

[Rygar]

You seem to be quite knowledgable about these programms

If I move to a new DC I want to import these 603 without consessions because I allready miss a lot.
How do I export these and which programm would you recommend as an alternative that can work with any new DC.

You can use Diving Log by Sven Knoch or Subsurface. Both should handle any computer existed

 

[Rygar]

Updated or Changed on 31.03.2024:

[Ambient Pressure Diving AP Log Viewer SPORT v5.2.5.0]

[Blue Edge D-Twin v3.0.366]

[Dive-Xtras Castle Link 2 v1.0.3]
[Dive-Xtras Castle Link v3.86.01]

[Divesoft Divesoft.center v1.1.5]

[DiveSystem Ratio Toolbox v1.8.8]

[Garmin Express v7.20.3.0 for Descent Mk1]

[Mares Dive Organizer v2.30.0.11122]

[Poseidon Reef v1.3.15]

[Seac Sub SeacSync v1.0.0]

[Seacraft ENC2 v1.157.0]

[Shearwater Cloud v2.11.3]

[SuuntoLink v4.1.11]

[VMS (Vobster Marine Systems) DiveSuite v1.1.183]

 

[c-weed106]

I'm hoping someone here may be able to guide me to the correct software for the AERIS ATMOS 2 and 300AI for a Windows 10 OS, a download link would be ideal. I've contacted Oceanic (Huish) as well as Pelagic (now owned by Aqua Lung it seems) and all I get is "we don't have it, sorry you are SOL (scubadiver outta luck)" I've acquired these two dive computers and would like to start tracking dives on them but am at a loss for the software.

 

[Belzelbub]

I'm hoping someone here may be able to guide me to the correct software for the AERIS ATMOS 2 and 300AI for a Windows 10 OS, a download link would be ideal. I've contacted Oceanic (Huish) as well as Pelagic (now owned by Aqua Lung it seems) and all I get is "we don't have it, sorry you are SOL (scubadiver outta luck)" I've acquired these two dive computers and would like to start tracking dives on them but am at a loss for the software.

If I’m reading this right, it looks like you are just trying to download the dives. If so, no need for Aeris specific software.

Subsurface lists those two as supported. Which should mean that many other 3rd party apps would work.

Subsurface Divelog

Subsurface Homepage

subsurface-divelog.org