Wanted Din female to Din female

[marc.collin]

hi

i'm looking for a Din female to Din female adapter

thanks

 

[CG43]

Hello

Adapter

But it is a company in germany !

 

[TravisD]

What are you trying to accomplish? There are DIN to 1/4NPT fittings out there that you could roll your own with, but they’re not cheap.

 

[Rollin Bonz]

Got a spare set of manifolded valves...?

 

[Jonn]

So, like a trans fill whip? NorthEast has you covered:

Transfill Whips

Transfill Whips

northeastscubasupply.com

 

[marc.collin]

What are you trying to accomplish? There are DIN to 1/4NPT fittings out there that you could roll your own with, but they’re not cheap.

take din of compressor connect to this connector, other put a first stage and connect the hose with a convertor to another converter npt 1/4 to g 1/2

 

[TravisD]

NESS has the DIN-F fittings, but at $100/ea if you have the option to convert the fill whip end to a Parker ST style (pressure washer) quick disconnects you might be better off.

If you don't have a specific 1st stage already, the Yoke blocks are less than half the price of the DIN ends. I have one of these with a Parker QD that I can use to hook up a 1st stage "shop air" thing to my bank.

 

[marc.collin]

i would like to have possibility to fill from cylinder or diving compressor... in both case a din to din female should be great

 

[rhwestfall]

fill what? What are you trying to build? Can you sketch/describe this?

 

[tbone1004]

take din of compressor connect to this connector, other put a first stage and connect the hose with a convertor to another converter npt 1/4 to g 1/2

What is using the G 1/2 and why do you need it to be low pressure? The easiest way to do this is to tap the dipstick of an old valve for 1/4 NPT and then you can put whatever you want on the end of it but that seems really clunky.