nightshadow357532
Guest
- Messages
- 4
- Reaction score
- 0
does anyone know anything about dacor aero regs? also, does anyone know how to remove.....mineral deposits around the hose connection jackets?
dacor regs
- Thread starter nightshadow357532
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
BrianS
Contributor
May want to try the Regulator forums instead.
nightshadow357532:
By "hose protection jackets" do you mean the hose protectors that consist of short (about 4") sleeves that are installed at the ends? If so, the best solution is to take them off and leave them off. They do not achieve thier intended purpose, they trap salts (as you have seen) and they make it difficult to check your hoses for damage. To get the mineral deposits (salts) off, soak the effected parts in a solution of CLR or other similar household lime cleaner. Then rinse in fresh water. If you do this with the hose disconnected from the regulator, run some water through the hose to rinse the inside and then blow air through it to dry it out.
Similar threads
