D400 I need an o'Ring or the kit that comes with it. Help! can´t get one.

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

dfrancos

Registered
Messages
41
Reaction score
3
Location
Tequila Land
I have a D400 ScubaPro Second stage and I cant find the O´ring pointed on the photo below. I hope someone could help find it or the complet kit to leave my reg working again.
 

Attachments

  • la foto.jpg
    la foto.jpg
    15.5 KB · Views: 141
I only have the part number (01-050-323) and not the size. I will try to get that info. Thanks
 
Im not sure about finding it super cheap online. IIRC its a metric 4x1mm and no supplier was selling them (except custom order). I would want to be mistaken though.
The kits were available on ebay
 
Take the old o ring down to a hose shop and most likely they will have one. ALL o-rings have a + and- difference , And that's from the Parker handbook for fitting O-rings. the black rings are standard buna n material. I've been rebuilding Conshelf Regulators for over 40 years with some store bought O-rings so far never had one problem...
 
Take the old o ring down to a hose shop and most likely they will have one. ALL o-rings have a + and- difference , And that's from the Parker handbook for fitting O-rings. the black rings are standard buna n material. I've been rebuilding Conshelf Regulators for over 40 years with some store bought O-rings so far never had one problem...

all the viton and epdm orings I have in my box are black the color does not have anything to do with material
 
all the viton and epdm orings I have in my box are black the color does not have anything to do with material

I was not aware of that from manufacturers other than parker I always thought parker was the standard. However buna n works fine in any of the conshelf regs I have ever rebuilt. I dont see why they wouldn't work in any regulator. I know take it to the shop.
 
I've been rebuilding Conshelf Regulators for over 40 years with some store bought O-rings so far never had one problem...

I never buy the Aeris battery kit for my dive computer. $10 for a CR2450 and an O-Ring? Please. Buy the CR2450s 10 at a time online and you they're around $1 each. O-Ring = a few cents (bulk purchase, but some of us really need lots of types of o-rings for service).
 
https://www.shearwater.com/products/teric/

Back
Top Bottom