Cobalt 1 help: What to do if your battery is dead

[wizbangdoodle]

Ron, left you a PM.

 

[tursiops]

There may be- the issue had always been the fact that we included a built in thermistor that has to be connected for the Cobalt to recognize the battery.

A customer pointed out this battery to us- it has the same thermistor we use in the Cobalt and easily fits in the Cobalt case. We have tested it here and so far it looks like a good replacement- not precisely identical, but close enough in capacity that the battery fuel gauge still works properly.

The only trick would be to solder the battery leads onto the connector used in the Cobalt- a very easy soldering job. The battery thermistor connector in the Cobalt is the blue wire, and as per convention, the red wires are positive and the black ground, matching this battery. So the yellow wire on the battery would attach to the blue Cobalt position. As this battery is used in Logitech mice, it should be available, probably from a variety of sources worldwide.

Here is a link from Amazon:
Hope this helps some of you with battery issues.

Ron

Can you please supply this link again, perhaps in plain text? I thought I ordered the correct battery, but it is too thick for the Cobalt battery compartment, by about 3mm. Thanks.

 

[RonR]

Can you please supply this link again, perhaps in plain text? I thought I ordered the correct battery, but it is too thick for the Cobalt battery compartment, by about 3mm. Thanks.

It looks as if the link may have broken or been changed. Here is a description to search for:

EDIT- We're revising this reference to another battery available from Amazon that does fit into the Cobalt's case. If you can soldier on the connector that comes with the original Cobalt battery this should be a good replacement.

WRUMI 2500mah 533-000132 for Logitech Battery G933, G933S, G533, G533S, G935 Headset Battery​

 

[tursiops]

Yes, that is what I purchased. The 10mm thickness is too think for the battery compartment to close. I note the drawing says the thickness is 5mm, but the written specs say 10mm, and it measures 10mm.
Oh, well. Thanks anyway.

 

[RonR]

Yes, that is what I purchased. The 10mm thickness is too think for the battery compartment to close. I note the drawing says the thickness is 5mm, but the written specs say 10mm, and it measures 10mm.
Oh, well. Thanks anyway.

You're right- the description is now wrong, the table is correct, and 10mm will be too thick. The original battery is only about 7.5 mm thick. We will look for a readily available alternative. In the meantime, if you need a battery message me here and I'll get one to you.

Ron

 

[wizbangdoodle]

I just wanted to say thanks again to Ron. You and your wife were a great help and were so gracious with your time. When you have a new product, I'll be first in line.

 

[tunerfish]

You're right- the description is now wrong, the table is correct, and 10mm will be too thick. The original battery is only about 7.5 mm thick. We will look for a readily available alternative. In the meantime, if you need a battery message me here and I'll get one to you.

Ron

Hey Ron, I need a battery for my cobalt. The old one had moisture and I can’t message directly because I don’t contribute enough…just read a lot part number would be great!

Thanks,
Chuck

 

[RonR]

Hey Ron, I need a battery for my cobalt. The old one had moisture and I can’t message directly because I don’t contribute enough…just read a lot part number would be great!

Thanks,
Chuck

The part in post # 73 above seems to be still available from Amazon. We have tried it and it's a good replacement, though the connector from your old battery would need to be soldered onto the new battery leads. That's a simple job for anyone with basic soldering skills and equipment. If that's a problem let me know and we will work something out.

Search on Amazon for:

WRUMI 2500mah 533-000132 for Logitech Battery G933, G933S, G533, G533S, G935 Headset Battery​

 

[Butch Balingit]

Hi Ron, I sent you an email because the forum wouldn't let me dm you. Thanks, Butch

 

[tunerfish]

The part in post # 73 above seems to be still available from Amazon. We have tried it and it's a good replacement, though the connector from your old battery would need to be soldered onto the new battery leads. That's a simple job for anyone with basic soldering skills and equipment. If that's a problem let me know and we will work something out.

Search on Amazon for:

WRUMI 2500mah 533-000132 for Logitech Battery G933, G933S, G533, G533S, G935 Headset Battery​

That worked for the battery, ordered and replaced following the step by step.

Now, I need to find some new magnets. Any suggestions for where to go in Central, FL? If that doesnt work to correct my up issue, I think the reeds will need to be replaced. Can you quote me a price for my cobalt 1?


Thanks,
Chuck