C'mon all you math gurus!

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Rol diy

Contributor
Messages
369
Reaction score
206
Location
Ont
Good option.
He has a a volt meter to monitor it...
Not as fancy as mine
but all it really needs.

Still can't load pictures
 

treasurehunter

Contributor
Messages
168
Reaction score
43
Location
Montreal,quebec
# of dives
500 - 999
Yes about 24 -1/4'' and you can go a little shorter but not by much. I have 2 pounds at battery level, and I put about 4+ pounds in the nose to have perfect trim. so like @tbone1004 mentioned it would be risky to shorten more than another inch.
I really recommend to install the Smart DPV controller from @Jona Silverstein. the gears make the scooter so much more enjoyable and quiet. And you can, after your dive, download battery temp, motor temp and much more to see what is happening inside.
you can go see my thread to see what I did with mine.
Uv 26 conversion
 

Rol diy

Contributor
Messages
369
Reaction score
206
Location
Ont
Other than a balance board,
it's all diver monitoring
20210902_152754.jpg
 
https://www.shearwater.com/products/peregrine/

Top Bottom