Changing Scubapro 2nd stage to lefthand feed?

[Pavel Spirine]

Hi everyone,

I have a MK2/R190 regulator for my pony bottle, but would like to have it changed to a left hand feed. What exactly is involved in doing this?

Cheers,
Pavel

P.S. I'd have my LDS change it but they seem a bit baffled by how to do it (I'm in cyprus and there's very few people here that would need a left-hand feed for their regs!)

 

[DA Aquamaster]

1. Remove the purge cover and diaphragm.

2. Remove the nut over the inlet fitting with a scubapro multitool, then unscrew the inlet fitting with a 12 mm open end wrench, remove the aspirator assembly, remove the plastic plug on the other side of the regulator case (rotates 90 degrees and pushes out).

3. Remove the small grey plug in the aspirator assembly and put it in the small hole on the other side of the aspirator assembly.

4. Reassemble everything on the opposite sides of the case.

5. Retune the regulator.