Can I use CCR Petrel for OC diving?
- Thread starter dylanfromwinnipeg
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
- Messages
- 20,690
- Reaction score
- 15,264
- # of dives
- I'm a Fish!
you can in that it has the modes to but cable is not removable so I would strongly suggest getting a cap for the subconn and finding a good routing solution for the cable under the bungees. More trouble than its worth for most so thye'll get a backup computer. It's the only downside of going away from the Fischers, the Subconns are superior in every single way except they don't have a clean bulkhead for OC diving. A worthwhile tradeoff IMO
lermontov
Contributor
ive never tried but I guess you could run it in Bail out mode at the start of a dive - the cable can be run up your arm and to keep it tidy too could get an old pair of tights /leggings and cut them off and just use the leg part over your arm- no doubt you have a back up computer anyway from your OC career?
petrel looks nice and shiny did you buy a new set up
petrel looks nice and shiny did you buy a new set up
This is the inside of a SW with fixed cable connection. It's not just the connector on the outside of the computer, the inside is completely sealed off as well.
Getting a 2nd SW as a backup is cheaper than a cable replacement! Fixing a cable fault is a headache.....
OP
dylanfromwinnipeg
Contributor
I own a Perdix also, but my Perdix is currently down in Mexico, and I'm up in Canada right now. Have a pool session coming up (family is trying a discover scuba dive), and I was hoping to test out some gear I have laying around - have a handful of AI transmitters I haven't used in a while wanted to check if they still work. But if it's going to be a big hassle to bring the Petrel into the pool on OC, I'll just skip it.
mr_v
Contributor
See Petrel 3 failure threads, too.
missionmtb
Contributor
AK*
www.narkedat90.com
AK 4-pin blanking plug (female)
AK 4 pin Blanking Plug(FEMALE) This AK 4 pin female blanking plug is to fit to a male pin ak cable
www.narkedat90.com
mr_v
Contributor
If you're in the US, get the plugs from Fathom Dive to save on shipping, currency exchange.AK*
AK 4-pin blanking plug (female)
AK 4 pin Blanking Plug(FEMALE) This AK 4 pin female blanking plug is to fit to a male pin ak cable
4-pin dummy plug - Fathom Dive Systems
www.fathomdive.com
cjguy23
Registered
yes use blanking plug
billgraham
Contributor
I think I'd get another computer for OC diving and leave that one with the CCR. My Petrel has a different connector, that one I think is called a "wetmate". On my rig, the cable stays with the head and there's a plug for the computer port. I borrowed the small Shearwater one from Cave Adventurers (Peregrine?) and that seems fine for 2 gas OC diving and it's a lot more compact.
Similar threads
