c5050 question(again)
- Thread starter zaf88
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
You certainly aren't helping! 
:mean:
:mean:BillAllbritten
Contributor
if you use the Sea and Sea multitray and the shoe style base adapter that comes with the Sea and Sea Infinity arm (flexible ball style) or possibly other arms, that the flange on the PT015 housing which is used to attach the keeper string for the rubber LCD hood isn't trapped between the runners of the shoe.
It was mighty close on mine and I could imagine twisting the housing a bit on the tray, putting pressure on that flange, and starting a flood, particularly in shallow water. Solution was to use a hack saw or Dremel tool to cut off part of the bottom edge of the shoe to provide clearance, touch up with BBQ grill paint.
If you get this set up, you'll see what I mean immediately - about a 5 minute fix.
Bill
It was mighty close on mine and I could imagine twisting the housing a bit on the tray, putting pressure on that flange, and starting a flood, particularly in shallow water. Solution was to use a hack saw or Dremel tool to cut off part of the bottom edge of the shoe to provide clearance, touch up with BBQ grill paint.
If you get this set up, you'll see what I mean immediately - about a 5 minute fix.
Bill
Similar threads
