Bristol ccompressor and WTB filter tower setup

[Kirk king]

Hello,

New here so if not allowed I'm sorry...

I'm looking for some information on a compressor I bough and wondering if any one can help me.

The compressor is a bristol model 4s 24-40 do any one k.ow cfm of this model or where I can find some info??

Also looking for a complete filtration system for this compressor if any one can help me there.

 

[windyairman]

Hi
Speed of compressor is 800 rpm
Displacement is 22.7 cfm
Charging rate is 18 cfm
Also i have full manuals for this block & loads of spares

 

[Kirk king]

Hi
Speed of compressor is 800 rpm
Displacement is 22.7 cfm
Charging rate is 18 cfm
Also i have full manuals for this block & loads of spares

Do you have the manual in pdf form or some way I can get a copy? I'd like to ass a first stage 2nd and third stage pressure gauge too and is it possiable to put a oil pressure gauge on them?

 

[Kirk king]

Hi
Speed of compressor is 800 rpm
Displacement is 22.7 cfm
Charging rate is 18 cfm
Also i have full manuals for this block & loads of spares

also what oil should i run for best in this compressor? mineral oil???

 

[rcontrera]

Filtration is pretty simple. You just need a moisture separator with relief valve, automatic drain, filter tower, PMV and mounting brackets for it all. Should be less than $2500 for it all.

 

[windyairman]

also what oil should i run for best in this compressor? mineral oil???

Hi
If its been run on mineral oil the stick with it.
To change over to synthetic you must do a full strip down to remove any carbon build up.
If you just change to synthetic them the carbon will turn soft and break away,Damage will be done to pistons & cylinders.
A full rebuild on a 4s24 is about £3500 Uk pounds

I dont have manual on pdf but can send a copy to your land addressif you PM me your address.

Compressor is splash lubricated so no oil pump is fitted.
Yes you can fit gauges for 1st 2nd & 3rd stages easy.
The threads in to the cylinder ports is 1/4 BSP not NPT

 

[Kirk king]

If I dont k ow what's in it for oil how would I go about that? Oil sample for testing?

 

[windyairman]

If I dont k ow what's in it for oil how would I go about that? Oil sample for testing?[/QUOTE

Play safe use mineral sae30