Lizard Leg
Contributor
Is this possible with the Balance BC? Do I need the wrapture on non-wrapture version of the GripLock?
Balance BC - removing single cam band and replacing with dual Griplock?
- Thread starter Lizard Leg
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Repair.Tech.Kyle
Contributor
Lizard Leg,
it is possible to put a grip lock on the balance. you will need the Non-Wrapture GripLock PN: 428210 however it would still be a single band set up. should you have any other questions please let me know.
it is possible to put a grip lock on the balance. you will need the Non-Wrapture GripLock PN: 428210 however it would still be a single band set up. should you have any other questions please let me know.
OP
Lizard Leg
Contributor
Thank you for the fast response. Is it possible to retrofit dual bands onto the Balance? Bought 2012.
Repair.Tech.Kyle
Contributor
Unfortunately not without damaging the integrity of the back plate. what size tank are you diving?
OP
Lizard Leg
Contributor
The non-wrapture is the longer strap?
Repair.Tech.Kyle
Contributor
correct
Uh, I dive a steel 120 with a 30 pony on back on the Balance. Just finished my solo course with it. Not sure why you want 2 bands. Mine are secure in any position, head up, level, and head vertical down (ie crayfish hunting, which requires a complete feet-to-the-sun position). No slips encountered in 3.5yrs of use - the griplok does its job, and my rig above water is damn heavy. I do use 2 cams on my BP&W, but that's not Griplok. YMMV.
Similar threads
