Atomic Aquatics M1 Scuba Regulator Yoke plus bag & octo
Atomic Aquatics M1 Scuba Regulator, Yoke, Gray
The unit was also hooked up to a tank and tested only on single dive. It is like open box item. Nothing wrong with the unit - it is in a perfect like new condition.
Original box, manual, all plugs
Included free regulator bag and free octopus.
All for $500 plus shipping
Miami - Fort Lauderdale area
Call (954) 501-0267
Why Monel?
The M1 employs state-of-the-art metals specifically chosen for extreme
diving situations. Monel parts are used internally in the first stage
for high strength, corrosion-resistance and oxygen compatibility.
316 Stainless Steel, multi-layer Zirconium coated Brass, and
Titanium are used throughout the second stage. The M1 valve
body is Zirconium/Nickel over Brass and the seat saving
orifice is Stainless Steel.
Designed For Challenging Conditions
Engineered by Atomic for specialty diving rec or tech
The M1 has an expanded performance range to meet almost any diving condition
imaginable, whether Recreational or Technical. Accomplished specialty
divers will appreciate this regulator designed to fulfill virtually any need or diving
scenario. The M1 is built on the same platform as the world acclaimed T2
and B2 regulators.
First Stage:
∙ Factory ready for Nitrox to 50% or oxygen mixes to 80% when special
guidelines are followed
∙ First stage materials are chrome plated Brass for the body and Monel
for key internal components
∙ Atomic Jet Seat high-flow piston first stage
∙ Freeze protected factory-sealed first stage also prevents contamination such
as silt and sand
∙ First stage ports: 2 HP fixed / 5 LP on swivel cap
Second Stage:
∙ Designed for cold water diving featuring thermal heat sink and improved
super-dry exhaust valve
∙ Second stage components are made of precision machined Brass with
Zirconium plating and Titanium
∙ Patented Atomic Seat Saving Orifice
∙ Patented Atomic Automatic Flow Control (AFC)
∙ A new high-flow second stage case lowers breathing effort at any depth from
shallow water to beyond the limits
∙ Rapid adjustment knob for manual second stage de-tuning in special situations
∙ Surge protected second stage front cover for high current scenarios
∙ Super-wide exhaust deflector to disperse bubbles for enhanced visibility
∙ Dual silicone comfort fit mouthpiece with tear-resistant bite tabs
∙ 2 year/300 dive service interval
Atomic Aquatics M1 Scuba Regulator, Yoke, Gray
The unit was also hooked up to a tank and tested only on single dive. It is like open box item. Nothing wrong with the unit - it is in a perfect like new condition.
Original box, manual, all plugs
Included free regulator bag and free octopus.
All for $500 plus shipping
Miami - Fort Lauderdale area
Call (954) 501-0267
Why Monel?
The M1 employs state-of-the-art metals specifically chosen for extreme
diving situations. Monel parts are used internally in the first stage
for high strength, corrosion-resistance and oxygen compatibility.
316 Stainless Steel, multi-layer Zirconium coated Brass, and
Titanium are used throughout the second stage. The M1 valve
body is Zirconium/Nickel over Brass and the seat saving
orifice is Stainless Steel.
Designed For Challenging Conditions
Engineered by Atomic for specialty diving rec or tech
The M1 has an expanded performance range to meet almost any diving condition
imaginable, whether Recreational or Technical. Accomplished specialty
divers will appreciate this regulator designed to fulfill virtually any need or diving
scenario. The M1 is built on the same platform as the world acclaimed T2
and B2 regulators.
First Stage:
∙ Factory ready for Nitrox to 50% or oxygen mixes to 80% when special
guidelines are followed
∙ First stage materials are chrome plated Brass for the body and Monel
for key internal components
∙ Atomic Jet Seat high-flow piston first stage
∙ Freeze protected factory-sealed first stage also prevents contamination such
as silt and sand
∙ First stage ports: 2 HP fixed / 5 LP on swivel cap
Second Stage:
∙ Designed for cold water diving featuring thermal heat sink and improved
super-dry exhaust valve
∙ Second stage components are made of precision machined Brass with
Zirconium plating and Titanium
∙ Patented Atomic Seat Saving Orifice
∙ Patented Atomic Automatic Flow Control (AFC)
∙ A new high-flow second stage case lowers breathing effort at any depth from
shallow water to beyond the limits
∙ Rapid adjustment knob for manual second stage de-tuning in special situations
∙ Surge protected second stage front cover for high current scenarios
∙ Super-wide exhaust deflector to disperse bubbles for enhanced visibility
∙ Dual silicone comfort fit mouthpiece with tear-resistant bite tabs
∙ 2 year/300 dive service interval