ATOM 2.0 - NiHi

[furby076]

Hello All,

I have the Atom 2.0 and sent it in for repair. I got it back and the settings were reset. I dive nitrox and pretty much a few minutes after I enter the water (on the first dive) I get a niHi warning. My SET F02 (default 50) is set to Off. I am not sure what else could be causing this. Could it be the tissue loading bar graph (TLBG)? I think i have it to TLBG6, but don't know what I *SHOULD* have it at.

Regards

 

[MarineResearch]

Either you have the TLBG setting at one or two segments, or there is a problem with the computer. You should not have high nitrogen after just a few minutes unless you have the alarm set very low. As for the proper setting, that is up to you and the level of risk that you want to take. Oceanic recommends setting the alarm to a point prior to where you would enter deco mode. I use two OC1 computers and have mine set to alarm when I enter deco when I am diving doubles and want to enter deco. Otherwise, I have the alarm set one bar prior to deco.

 

[UndrWatrDan]

My Atom 2 is set to TLB6 (I think that is a 6)

 

[furby076]

Yea I have TLBG-6 at 4 segments, and Default 50 is set to OFF.