At Pack

[Ronald L]

Any one know where to find parts for the Sea Pro At Pack ?

 

[Vie]

I believe these guys may have the parts:

http://www.divetekinc.com/

DiveTek, Inc.
7281 Garden Grove Blvd, #A, Garden Grove, CA 92841

1-888-421-9938

the website is not up at the moment though...

 

[Scottri]

SeaPro became DiveTek several years ago but you should still be able to get parts for some of the newer SeaPro BC's.

 

[Ronald L]

Thanks for the info Vie and Scottri . I'll keep an eye on that web site.------------Ron

 

[Creed]

Any one know where to find parts for the Sea Pro At Pack ?

I looked at getting an At Pac not too long ago. It had a leaking bladder. I was going to get a bladder for one of the newer wing models, and modify the housing to hold it.

 

[ba_hiker]

I looked at getting an At Pac not too long ago. It had a leaking bladder. I was going to get a bladder for one of the newer wing models, and modify the housing to hold it.

Be carefull. IU dove an at-pac for severel years and had no problems, but they had..issues.

1) The lead in the back section tends to corrode into a mass that won't just fall out.

2) The inflator hose is inside the corrigated deflate hose, so any air leak fills the bladder.

3) The tank is held away from your back, so that the unit is more back heavy than most.

4) Difficult to use with doubles. Doubles must use their special doubles adapter, which holds the tanks further apart than is standard, making finding a manafold difficult.

 

[Ronald L]

I bought one new in 1978 and used it for more than 20 years before I retired it. I could not get parts. I have modern equipment now ,but It does not compare to the streamline, no clutter , no hassle At-Pack. But that's just me . Anyway thanks for all the input on my old favorite rig.-----Ron