Aqualung Titan LX regs

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

mattspiral8

Contributor
Messages
90
Reaction score
19
Location
Las Vegas, NV
# of dives
100 - 199
Hey guys. So i was able to find a seller that is selling his aqualung Titan LX regulator with octo and dive comp/spg.
Wanted some advice from all the experienced divers here about the regulator.
Is this regulator any good? Would it last? it seems like its in very good condition, owner is a marine biologist and selling the regs for $250.
so hit me with your opinions, good or bad.
I appreciate it! I
8111DAD5-1807-48D3-8126-46AF115760E9.jpeg
9595F8AB-4497-4667-8F39-3086F4B3D2A6.jpeg
4C841226-29C4-4D0D-903B-BDB58080528C.jpeg
 
Can't tell for sure which Titan model that is, the first stage design was changed in 2009 but in either case they are good regulators. If it comes complete as shown, I'd go for it. The Viper computer alone sells new for $300.
 
Omniswivel is worth a few bucks. Computer is an old 3 button Vyper. Not worth much but serviceable. Figure about $170 to service so your total cost about $440 for a decent reg set. Pretty good price.

The primary will most likely be on a 40” hose allowing under the arm routing. Make sure you know how to dive the setup before splashing in.
 
If you’re diving warm water they’re a good regulator set. Price is very reasonable as well in my opinion. Make sure to get them serviced if not done yet.
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom