Aqua Lung i300 not working

[Snakekid97]

I went on a dive today, and before starting the computer started flashing "Up " and "UIO". It would show the dive time, but not the depth or any other information. We were only diving at ~4-5m max depth (with an average of 2-3m) so I went ahead and did the dive anyways. The issue persisted throughout the dive and continued after diving. In fact, it is still adding to the dive time despite having been dry for several hours. I don't seen anything about this in the manual and haven't found anything else about it online. Does anyone have any ideas?

 

[jborg]

Not specifically, but I very much suspect that error means “pressure sensor defective, I need service”…

 

[Where2Next]

I went on a dive today and experienced the same exact error on my aqua lung i300c did you ever figure out what was going on?

 

[Where2Next]

 

[jorge1561p]

This is what the manual says.

 

[jorge1561p]

VGM (VIOLATION GAUGE MODE) DURING A DIVE

During Dive mode dives, operation will enter VGM when Deco requires a Stop Depth greater than 21 m (70 ft). It will also enter VGM if Deco is activated during a dive in Free mode, described later. Operation would then continue in VGM during the remainder of that dive and for 24 hours after surfacing. VGM turns the i300C into a digital instrument without any decompression or oxygen related calculations or displays. Upon activation of VGM, the audible alarm will sound and the alarm LED will flash. The graphic VIO (violation) and Up Arrow icon will flash. After the audible alarm becomes silent, the NO DECO and N2 Bar Graph will be removed from the display.



VGM (VIOLATION GAUGE MODE) ON THE SURFACE

Upon surfacing, the VGM Dive Main will remain on display for 10 minutes with Surface Interval time displayed with the SURF icon flashing. The graphic VIO will also still be displayed flashing. Operation will also enter VGM 5 minutes after surfacing from a dive in which a Delayed Violation occurred.

• A full 24 hour continuous surface interval must then be served before all functions are restored.
• During that 24 hours, VGM does not allow access to the SET GAS, PLAN, FLY/SAT (Desat), and FREE Mode features/screens.
• The FLY countdown indicates time remaining before normal operation can resume with full features and func-tions.