Apeks AXT vs XTX exhaust Valve?

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

InWay2Deep

Contributor
Messages
195
Reaction score
102
Location
USA
I know these are different part numbers but has anyone used an XTX exhaust valve on an ATX and had it been OK? I have 2 ATX regs that I broke down to service and following the service manual I cut the exhaust valve off not knowing it was different and now I can't find any ATX exhaust valves in stock anywhere. Could I get away w/ using a XTX one or does anyone know where I could get a few ATX exhaust valves? The rest of the reg parts are in pretty decent shape so I hate to just toss them or use for parts.

Thanks
 
No, they're (subtly) different. I've bought lots of stuff from GiDiveStore before, and they have the right part number (RG912050).

Also worth noting the recall notice on the ATX exhaust diaphragms.
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom