Apeks ATX50 to DIN
- Thread starter ScoobieDooo
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
nickjb
Contributor
I thought the Apeks website was pretty clear.
OP
ScoobieDooo
Guest
I don't think it even shows US4, DS4 or DST's....
nickjb
Contributor
Under first stages there is a picture and specs for:
TX100 first, DST DIN, UST DIN, DS1 A clamp, DS4 and adapter, US1 A clamp, DST A clamp, Nitrox DS1 DIN, Nitrox DST and US4 A clamp.
If look around there is expleded views, cut away views, section views and breathing diagrams too.
Pretty thorough, I'd say. There isn't much about the ATX stuff on there, though.
TX100 first, DST DIN, UST DIN, DS1 A clamp, DS4 and adapter, US1 A clamp, DST A clamp, Nitrox DS1 DIN, Nitrox DST and US4 A clamp.
If look around there is expleded views, cut away views, section views and breathing diagrams too.
Pretty thorough, I'd say. There isn't much about the ATX stuff on there, though.
OP
ScoobieDooo
Guest
You must have a differant web sites than *I* do....mine is:
http://www.sea-quest.com/pages/regs/reg_apeks.html
http://www.sea-quest.com/pages/regs/reg_apeks.html
nickjb
Contributor
OP
ScoobieDooo
Guest
The Apeks UK site is great - the SeaQuest is poor though...
brian cooper
Contributor
Hi Scoobie Dooo,
The parts you will need are as follows:-
Item # Description Apeks Part
37 O-ring AP1409
38 Cap AP1264
39 O-ring AP1166
40 Connector AP1471
41 Wheel AP1470
42 Cone filter AP1472
You should be getting ALL the manuals on a CD from me to you via California, they have completed the first part of the journey safely........Look in the back of any of the 1st stage books to see the diagram.
It doesn't matter which type of 1st you have:US4,DST,DS4 the DIN fitting bits are the same...
Brian C (no charge...)
The parts you will need are as follows:-
Item # Description Apeks Part
37 O-ring AP1409
38 Cap AP1264
39 O-ring AP1166
40 Connector AP1471
41 Wheel AP1470
42 Cone filter AP1472
You should be getting ALL the manuals on a CD from me to you via California, they have completed the first part of the journey safely........Look in the back of any of the 1st stage books to see the diagram.
It doesn't matter which type of 1st you have:US4,DST,DS4 the DIN fitting bits are the same...
Brian C (no charge...)
OP
ScoobieDooo
Guest
Thanks Brian...
Similar threads
