Analyzer Storage

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

I use a OxyCheq - Sensor Saver it just screws to the sensor, so need s sensor with thread.

But in reality the sensor is a consumable and at about $100 for 2 years isn't that costly.
 
Given that it's a consumable, I'd still like to store it properly to both safeguard the device, in addition to prolonging the life of the sensor.

I realized an additional question based off your response Tbar, would be, "how does one know when the sensor is degraded to where it should be replaced"?

Thanks,
Rob
 
I don't think this answers the question but might help. https://www.divegearexpress.com/library/sensorhandling.shtml

In my case I have the tanks filled and when I collect they are analyzed, this is written on the tank, in the shops log and in my log. Prior to the dive we check the tanks, particularly important for the others in my group who where not at the shop. Typically I see about .2% to .5% variation in the analysis shop to my analyzer. When I get erratic results, compared to shop, I will need to change the sensor, but I will hopefully change it prior to that point.
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom