AIR II 2nd gen part number

[Couv]

Hello,

I have an AIR II 2nd gen that needs an inflator stem assembly. Does anyone know the part number for that gem? I think I have a 3rd gen parts list, if it is the same p/n I can look it up.....ain't that the way it goes? Also, I'm not sure that my regular parts guy will have the stem so if you have a contact, please let me know.

Thank you,

couv

 

[DennisW]

The part number for the Inflator Button and Stem Assembly is 21-080-008 assuming that is the part you want. That part number is made up of the Inflator Button P/N 21-080-003 and the Inflator Stem, P/N 21-080-113. PM me if you have any questions or need other part numbers for the second generation Air 2.

 

[serrada]

Looks like your question was answered, so I hope you don’t mind if I ask a quick question for you AIR II owners. I’m just curious what size are the hoses threaded for 3/8” or ½’ ?

 

[Couv]

Thank you DennisW....it is good to know I have an information resource so easily accessed as this forum.

Serrada, I do not know for sure- the hose thread size (3/8 is common for) but it threads into the same size hole as the regulator second stage or a regular power inflator. The difference is it takes a larger quick disconnect fitting to hook up to the AIR II than a standard power inflator.

couv

 

[DennisW]

couv is correct. An Air 2 has a special connector for the power inflator / regulator. It is a Scubapro part and can be purchased at any SP dealer. The other end (the one that connects to the 1st stage) is the same as any other inflator hose.

 

[serrada]

Ok, Thanks guys. Ya, I was wondering about the connection to the 1st stage.