Aeris Compumask

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Floribbean Divers

Registered
Scuba Instructor
Messages
51
Reaction score
10
Location
Santa Fe, NM
# of dives
500 - 999
After a recent dive trip I changed the battery on the computer because of an upcoming trip to Bonaire. The battery was very low but the computer still worked properly. Now, after replacing the battery, the co,puter will not turn on at all. Is there anything I can do to try to get it working before leaving. Please advise. thank you.
 
Just covering the bases here. Did you try a second, known good battery? I've run into a dead but new in the package battery once.
 
Even tried two more. Not that it even matters for this repair but I even have a clean room that I do the equipment repairs in. Mask had been dry for days and I downloaded all the dives off of it 10 minutes before changing battery
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom