A6500 + TRT s-Turtle Manual + 2x YS-D3s

[rks]

Let me try that again: Sign In - Wetpixel :: Underwater Photography Forums The thread is entitled: "Nauticam Battery Pack Problem - A6500" on wetpixel

It's a link to a wetpixel post that's why I had trouble finding it again. The pack I bought I liknked an amazon link above:
the description is:

Dual USB Output Super Slim Power Bank Ultra Thin, Attom Tech 3000mAh Portable Charger Mini External Phone Battery Pack Small Dual Outlet, Emergency Phone Power Backup (Black)​

 

[Nemrod]

Let me try that again: Sign In - Wetpixel :: Underwater Photography Forums The thread is entitled: "Nauticam Battery Pack Problem - A6500" on wetpixel

It's a link to a wetpixel post that's why I had trouble finding it again. The pack I bought I liknked an amazon link above:
the description is:

Dual USB Output Super Slim Power Bank Ultra Thin, Attom Tech 3000mAh Portable Charger Mini External Phone Battery Pack Small Dual Outlet, Emergency Phone Power Backup (Black)​

If you are still out there, I got the battery, now how did you get the lid off so as I not bugger mine up?

 

[rks]

If you are still out there, I got the battery, now how did you get the lid off so as I not bugger mine up?

I used a razor blade as I recall and very carefully inserted it around the top and pried away once I got one edge it came up pretty easily. I’ve got an stl for a 3D printer file to make an inset to cover it but tape works too

 

[rks]

 

[Nemrod]

I used a razor blade as I recall and very carefully inserted it around the top and pried away once I got one edge it came up pretty easily. I’ve got an stl for a 3D printer file to make an inset to cover it but tape works too

Thanks. I was thinking to just pour a slow set epoxy into it and then squeegee off the top to level it out flush to the edge?