Sold! A single OMS (Faber) LP 121/125

Sold!

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

rx7diver

ScubaBoard Sponsor
ScubaBoard Sponsor
Messages
2,262
Reaction score
1,845
Location
Central MO, USA
I purchased this OMS/Faber LP 121/125 cylinder new c. 1999 (original manufacturer's hydro is 09/1997). It has a new plus-hydro (02/2022, only the first hydro beyond the original) and a new VIP (03/2022).

Cylinder specs can be found in the Huron Scuba tank specification page (SCUBA Cylinder Specifications – Huron Scuba, Snorkel & Adventure Travel Inc. PADI 5 star IDC in Ann Arbor, MI): 125 cu ft @ 2,640 psig (= 2,400 + 10%) service pressure, 29" length (without valve), 8" outer diameter, 45# empty weight (without valve), etc.

My asking price is $250, which includes the tank boot, but NO valve, and the buyer pays PayPal charges and shipping from 65203 if applicable.

In the attached pics, the OMS 120 is flanked by a PST HP 120 (3,500 psig) and an old-school PST 72 (2,475 psig = 2,250 + 10%), for comparison purposes, only.

I will ship out using the original box that the cylinder was originally shipped to me in. (See pic.)

I purchased this cylinder originally intending to purchase a second one, to use the pair as manifolded doubles for Great Lakes tri-mix shipwreck diving. I ended that dream shortly after I purchased the first cylinder. (I began my family, and, so, ceased tech diving.) The cylinder has remained virtually unused all this time. Last year I made the decision to begin thinning my herd of cylinders.

PM me if you're interested.

rx7diver

OMS120_20220410a.jpegOMS120_20220410b.jpegOMS120_20220410c.jpegOMS120_20220410d.jpegOMS120_20220410e.jpegOMS120_20220410f.jpeg
 
I purchased this OMS/Faber ...
Just as I was thinking that I should bump this old FS thread, I was contacted by one of us here who is interested in this cylinder. I began draining it this afternoon, to take it tomorrow to get it weighed and to learn shipping + insurance cost. It just might be leaving soon for a new home, to be properly dove, instead of continuing to serve as a cascade cylinder of sorts!

rx7diver

OMS121-125_20240321.jpeg
 

Back
Top Bottom