I purchased this OMS/Faber LP 121/125 cylinder new c. 1999 (original manufacturer's hydro is 09/1997). It has a new plus-hydro (02/2022, only the first hydro beyond the original) and a new VIP (03/2022).
Cylinder specs can be found in the Huron Scuba tank specification page (SCUBA Cylinder Specifications – Huron Scuba, Snorkel & Adventure Travel Inc. PADI 5 star IDC in Ann Arbor, MI): 125 cu ft @ 2,640 psig (= 2,400 + 10%) service pressure, 29" length (without valve), 8" outer diameter, 45# empty weight (without valve), etc.
My asking price is $250, which includes the tank boot, but NO valve, and the buyer pays PayPal charges and shipping from 65203 if applicable.
In the attached pics, the OMS 120 is flanked by a PST HP 120 (3,500 psig) and an old-school PST 72 (2,475 psig = 2,250 + 10%), for comparison purposes, only.
I will ship out using the original box that the cylinder was originally shipped to me in. (See pic.)
I purchased this cylinder originally intending to purchase a second one, to use the pair as manifolded doubles for Great Lakes tri-mix shipwreck diving. I ended that dream shortly after I purchased the first cylinder. (I began my family, and, so, ceased tech diving.) The cylinder has remained virtually unused all this time. Last year I made the decision to begin thinning my herd of cylinders.
PM me if you're interested.
rx7diver
Cylinder specs can be found in the Huron Scuba tank specification page (SCUBA Cylinder Specifications – Huron Scuba, Snorkel & Adventure Travel Inc. PADI 5 star IDC in Ann Arbor, MI): 125 cu ft @ 2,640 psig (= 2,400 + 10%) service pressure, 29" length (without valve), 8" outer diameter, 45# empty weight (without valve), etc.
My asking price is $250, which includes the tank boot, but NO valve, and the buyer pays PayPal charges and shipping from 65203 if applicable.
In the attached pics, the OMS 120 is flanked by a PST HP 120 (3,500 psig) and an old-school PST 72 (2,475 psig = 2,250 + 10%), for comparison purposes, only.
I will ship out using the original box that the cylinder was originally shipped to me in. (See pic.)
I purchased this cylinder originally intending to purchase a second one, to use the pair as manifolded doubles for Great Lakes tri-mix shipwreck diving. I ended that dream shortly after I purchased the first cylinder. (I began my family, and, so, ceased tech diving.) The cylinder has remained virtually unused all this time. Last year I made the decision to begin thinning my herd of cylinders.
PM me if you're interested.
rx7diver
