o-ring

Hi y'all! I need O-rings for my PT059 Olympus TG-6 Housing... If anybody is coming soon and would bring them to Coz for me, I would be eternally grateful! https://www.bhphotovideo.com/c/product/1356056-REG/olympus_v6360530w000_replacement_silicone_rubber_o_ring.html...

When rinsing out the air bladder of my Aqualung Axiom BCD with fresh water today, after a week of ocean diving, a blue o-ring (about 18 mm diameter) came out with the water when I drained it with the inflator hose removed. Please see the attached photo. The o-ring does not fit anywhere that I...

Looking over the parts in my HOG D1 service kit, I found this o-ring. What the heck is with the little protuberances?! I have never seen anything like that, in my other service kits or anywhere else. I only service regs about once a year, and I don't deal with o-rings in my daily life, so I...

Hi All, I recently came across a great resource from Kieran at Diving in Depth. DIVING IN DEPTH - Dive Equipment Sales & Support for sizing up JJ orings and loved it especially since the JJ o-ring kit is just big bag full or o-rings and you have to play the game of find the size your looking...

This is what I got from Battastic, an eBay seller. The o-ring is the exact size needed. I couldn't see any difference between the replacement and the original. The packing made me a little nervous, as it's just a standard envelope, wax paper and battery and o-ring in little plastic zip-locks...

Maybe I'm overthinking it, but both my camera housings came with a tube of silicone grease to lube the o-rings. The directions make a point to say to only use the silicone grease supplied, or I may damage the material the o-ring is made out of. I'm about to replace the battery in my Cressi...

I'm trying to get into basic maintenance like replacing o-rings and such on the LP/HP hoses. I bought a whole slew of 90 DURO Vinton o-rings from Orings and More | Affordable and Quality Gaskets and Seals. I'm particularly interested in the LP hose where it meets the 1st stage. Do I use an...

Hi, Does anybody have the specs for the Suunto Core O-Ring? i.e. Inside Diameter (ID), Cross Section (CS) and Hardness (Sha). Thanks in advance :)