I know the DIN vs Yoke conversation is something that has already been beat to death on this forum. I’m not looking to start another conversation on which is better. I am however interested in gathering some empirical data regarding how far the regulator sticks out from the tank, and thus how...
I have 2 Poseidon XStream 1st stages pulled off of a Poseidon 7. So one is color coded for oxygen and the other is black.
There are scratches and scuffs in the chrome, but they both function perfectly. They're pretty bomb proof.
Looking to get 200 each +$10 for shipping. I'd do $350 for both...
In BAUE, some of us use the following tail weights to trim out our tanks. I dive on double Faber LP-85 steel tanks with Thermos DIN-only manifold and Highland double bands. These tail weights help me trim my tanks out perfectly and I can add/subtract tail weights as needed.
Parts:
1) Weight...
Used Scubapro MK17 yoke. This came with a second stage I needed, but have no need for the first stage. Needs to be serviced prior to use. Price is $175 USD shipped to lower 48, but only if someone buys this before Friday August 18th. I will be in US then and can mail it out USPS from Ilinois...
In another thread the issue of yoke vs. DIN came up (yet again). One of the arguments postulated against yoke was the idea that it could be dislodged or sheared clean off by impact while diving. Having only ever heard of this in the hand-wavy "it could happen" discussions, I'm hoping to get a...
I got this DIN regulator from a friend. It has the 5th port. It looks in great shape but I don’t know its history apart from the fact that it has not been in the water for at least 2 years so it definitely requires servicing before use. Asking 250$ plus shipping.
HI— heading back to COZ in a couple weeks and my Scuba.com order is taking FOREVER. Wondering if anyone has one to sell or a shop that has in stock. DC7 Hollis DIn only please!
Apeks first stage regulators DIN
Qty 2: DS4 nitrox, $150 each
Qty 3: XTX 200, $200 each (one is missing the rubber on the hand wheel, see second photo)
Payment with Venmo, PayPal or ApplePay
Selling one of my two DIN transfill hoses with gauge and pressure release twist valves at each end. The gauge reads in both PSI & BAR with markings every 100 PSI and 5 BAR. The gauge in protected from bumps and bruises with a textured rubber cover. Each DIN connector has an aluminum threaded cap...
Getting close to the back of the closet finally!
Up for sale this time is a Scubapro MK21 DIN compact piston travel regulator. This regulator saw 10 dives in the Philippines and four check out dives prior to leaving, it has been sitting in the dive closet ever since.
I had the 5th port add on...
I have three Scubapro mk17’s that have been sitting on my shelf for a couple years now and I need to make way for other gear.
As seen in the pictures:
TOP: Scubapro DIN mk17 with extra yolk and parts (New - Never Wet) (DOB: 2011). SOLD SOLD SOLD
MIDDLE: Scubapro DIN mk17 with extra yolk and...
My friend gave it to me when he quit diving recently, among other gear. He bought it brand new back when SP still had parts-for-life replacement program and the card is included here. It has never been used or wet; still shiny as you can see in its original box. I converted it from Yoke to DIN...
Is it correct to assume that all tank valves can be turned into DIN-compat by removing the inserts in the middle? Have you ever seen any tank that cannot accept a DIN reg? (If you have, please share your country/region, if possible)
Thanks.
Edit: I'm asking because I've got a DIN reg and I'm...
I just read that you can mess up your DIN regulator if you unscrew it by moving the whole system back and forth, instead of only using the collar to uncouple it from the tank valve.
I was always careful about fully bleeding the pressure and only using the collar to unscrew but there have been...
Got a bunch of these lying around, some of them never even touched water. Good on all ScubaPro first stages and I'm sure a few other brands too.
$20 each or best offer. Local pickup in Bay Area or shipping.
Looking to buy 1-2 Steel 100 HP tanks in the New England area. I would prefer tanks that are not too old, regularly serviced and hydro tested. I would prefer DIN connection or a DIN adapter but a Yoke is not a deal breaker, I can always switch it.
Please send pictures of tanks, engravings, and...
Worthington LP85 galvanized steel scuba cylinder, 200-bar DIN valve with yoke insert & 5250 burst disks, born 2/07, latest hydro 3/17, latest VIP 4/19, full of EAN36, Local pickup only in Southeast FL, asking $200. Contact me via PM.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.