Search results

I'm the second one who bought one Cressi Digi 2 spg. The cover plate has a small magnet on the bottom right corner that is necessary in case you want to change from metric to imperial units. In that case you do not need to pressurize the spg. You can also use any small magnet for the purpose.

Didi you look for the previous wife or you just chose to keep him ?

Probably grinding a normal socket would fit, just grab a cheap one with the 1/4 " or 1/2" hex socket and go easy. I don't think the nut is deadly tightened. just my 2c.

Might it have been banged ? In that case the spring could have been compressed for a moment and that caused a temporary loss of power. Just my 2 cents.

Sorry @homerdoc , I didn't know nothing about dry bleed valves on first stages... Never stop learning ...

Could it be a anchor point for disassembling ? The rubber plug just to avoid dirty or any other things going inside and start corrosion. If it is not threaded I suppose it is a blind hole.

I don't know, but I often see people carrying used (glued) pockets to be put on other wetsuits. Maybe there are special solvents.

I use SS self-locking dices

I added the 5th port and using the long hose, its routing goes straight down toward my right hip. All the others hoses are straightforward. You have only to choose if the backup should go over the shoulder or not. I use also the right hp port with a trasmintter attached to a 15cm hose. Never...

I have a waist band right pocket and use this as it would be a canister for the hose routing. It works flawlessly.

Do you mean D7i ? :wink:

Just for statistic purpose I had a leakage (not a complete failure) from a small o-ring in the swivel of my SPG. It was just a beginning of a dive, but I kept going because it was not an issue diving to 25 m.

I have wireless AI but a traditional SPG is clipped to my left D-Ring and I consult it some time.

EAN80 when could be difficult mantain 6m because rough sea else 100%

DIY Professional 18650 Battery Pack

Never for Air, always for any other mix. When I dive Air, usually all the divers are diving Air too (probably the blender cannot provide anything else). Sometimes I'd like to dive nitrox, but it is not available. For tec dives I always analyze every tank , whatever mix is supposed to be inside...

How deep were you when the AIR flashed ?

Is it possible that for a small period your computer lost the signal from the transmitter ?

There are sturdy plastic tank straps that are lighter than steel ones. They could also be fiberglass reinforced nylon. Personally I bought DTD Al ones. Don't know how they compare to the plastic ones. My choice was due the possible degradation of some plastics with salt and sunlight ... For the...

uhm, and if the mechanical had a salt crystal developing in the gears and it slowly respond to pressure dropping ? It is slow and until the force is not enough the mechanical seem "sticking" ... if you suddenly drop the pressure you could not notice it, but during the dive pressure drops slowly...