Aqualung I100 wont change gas

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Mason Gierke

Contributor
Messages
96
Reaction score
66
Location
Kankakee, IL
# of dives
0 - 24
Any ideas on why I can't get my computer to change gas, its set on air and want to set it for Nitrox but its won't give me the option. All the other settings can be adjusted, it has not gone into any kind of violation.
 
Some computers won't let you change from air to nitrox readily others will!!!
Set the air to Nitrox 21 in the beginning and make sure it won't default back to air afterward(period of time).
 
are you following the directions from page 21 from the Gas Lead In page to switch from Air to Nitrox?
Yes, its just 1 button that you hold for 2 seconds.

Some computers won't let you change from air to nitrox readily others will!!!
Set the air to Nitrox 21 in the beginning and make sure it won't default back to air afterward(period of time).
Problem is I am diving at the moment and it won't switch at all.
 
at the set air/ean screen you have to press less than 2 seconds to switch the setting. if you are currently set for air and you press and hold for more than 2 seconds, it bounces you back to the previous screen. the pelagic computers are not that intuitive you can just wing it without reading the manual or using the cheatsheet flash cards.
 
https://www.shearwater.com/products/swift/

Back
Top Bottom