Eric Sedletzky
Contributor
At the moment the base price for the plate alone in satin finish is $200I appreciate your getting what you have to get. The only problem I have is finding out how much that is. I have been unable to ascertain a method of getting price and availability of the FP. I can't PM you.
Cheers -
Add glamour polish $50
Add rail bracket $75
Add bottom wedge bracket $20
There is no difference in performance between a satin and a polished plate, it’s all looks and bling.
If you are using a VDH wing or Oxycheq wing then you can use the plate by itself with no rail bracket or wedge block since those wings have roll control logs top and bottom which set the tank out from the plate nicely and allow room for the wing to do it’s thing. If you are using a wing with no roll control cushions or a centralized roll control system, or a wing with no slots or slots that do not line up properly then you will need to order the plate with a rail bracket and use it as an adapter. The wedge block is designed to hold the tank in a position with the bottom kicked out about 3 degrees. It’s also mandatory if the diver wants to use the plate with no wing. It can also be used in combination with the VDH wing and Oxycheq wings to move the bottom of the tank out for a better position for some divers. Both the rail bracket and wedge block go over the wing and bolt down so the wing is right up against the plate.
So as you can see, I set up the pricing structure in a way that people can get into a plate fairly reasonably (for what it is) then pick and choose which options they want or need.
Hope this explains it.
I’ll look into the PM feature and try and fix it.