Capitano help

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Pharkas

New
Messages
2
Reaction score
0
Location
Syracuse
Does anyone know what is missing from the head of my 1st stage valve cover? It is the threaded hole in the upper left of the valve cover. It doesn't seem to show what should be there in the service manual. I have been searching the web for any images of the Capitano block and can't seem to find any that show the 1st stage cover.
1stStageHead.jpg
 
could be the high heat temp module
 
I have a 1985 version Capitano and that threaded hole is used by a support for my flywheel shroud.
 
Does anyone know what is missing from the head of my 1st stage valve cover? It is the threaded hole in the upper left of the valve cover. It doesn't seem to show what should be there in the service manual. I have been searching the web for any images of the Capitano block and can't seem to find any that show the 1st stage cover.View attachment 421892
Nothng is missing. That threaded hole is used for the belt guard, depending on design. Your unit seems to be the "portable" (CG-DV) assembled in the US, Bauer, Norfolk. If it were a Euro unit, the hole would be used to support the guard.
 
Last edited:
They’re right... nothing.
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom