Titanic tourist sub goes missing sparking search

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

The banging every 30 minutes gives some amount of hope, however, the difficulty of the size of the search area and remaining time makes this extremely challenging.
 
The banging every 30 minutes gives some amount of hope, however, the difficulty of the size of the search area and remaining time makes this extremely challenging.
Even if they have a cable this long, I wonder if an ROV could move the cable to attach it to the sub.
 
Even if they have a cable this long, I wonder if an ROV could move the cable to attach it to the sub.
I would guess the main options would be to either somehow activate the Titan's own ascent controls (i.e. try to nudge the ballast release) or attach lift bags of some sort? I feel like a towed cable would be unfeasible at 3,800m.
 
I would guess the main options would be to either somehow activate the Titan's own ascent controls (i.e. try to nudge the ballast release) or attach lift bags of some sort? I feel like a towed cable would be unfeasible at 3,800m.
I have no concept of the mid-water currents there, but a fair sized oilfield boat with DP out of St. John would have the anchor handling winch and Work Class ROV to drag a cable down to snatch the submersible.

Making it all happen before tomorrow morning is a bit of a stretch. Gotta find it before we recover it.
 
Even if they could open the hatch. The pressure hull would flood. They appear to be using the pressure hull as flotation. The main reason to use carbon fiber.
It needs to be lifted clear of the water to open the hatch...
If they flood the pressure hull it probably going to sink before you can get out. You need the surface support no matter what.

It seems to me the whole design is a pressure tube with no hull piercing for wiring etc.
I think they are using radio waves to control everything by having the receiver in a separate housing just outside or against the pressure hull. (They better have at least 2 redundant systems that can take over, )

Overall from what I have seen in pictures and read it doesn't seem like a terrible design... (obviously it needs improvement)

Don't really like the carbon fiber idea.. I would prefer full titanium hull.
There's just something about steel that makes me feel better.

So, basically the hatch is the viewport at the horizontal position of the submersible?

 
Back
Top Bottom